This documentation is for Release 6.x. For documentation on previous releases, please select from the options below.
These instructions provide a recipe for building your own all-in-one Avalon system from scratch on CentOS or Red Hat Enterprise Linux, version 6.x is supported, 7.x will be supported soon. Please note that while an all-in-one installation as outlined here is certainly suitable for testing and demos, a single, all-in-one, server may not be suitable for production environments.
Ready the Installation Environment
Make sure a valid hostname is resolvable
The default hostname is “avalon.dev”, so name the machine this and enter it into /etc/hosts
# hostname avalon.dev # cat /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 avalon.dev
Configure iptables
The Avalon Media System requires several ports to be open to client browsers.
Here are the port settings that will need to be configured:
Port | Purpose | External? |
---|---|---|
80 | HTTP (Avalon) | Yes |
1935 | RTMP (red5) | Yes |
5080 | HTTP (red5) | No |
8983 | HTTP (Solr) | No |
8984 | HTTP (Fedora) | No |
8080 | HTTP (Matterhorn) | Yes |
The preferred method is to create a shell script that will do the work for you. Here is an example script that you should look through and customize as needed: avalon-iptables-config.sh
If you're connected over ssh, it might kick you off.
Save your script to /etc/sysconfig/avalon-iptables-config.sh, make it executable and run it.
chmod +x /etc/sysconfig/avalon-iptables-config.sh /etc/sysconfig/avalon-iptables-config.sh
If you run into connection issues you can disable the iptables, by running "service iptables stop". This will completely drop your firewall. When finished troubleshooting run "service iptables start".
Disable SELinux
echo 0 > /selinux/enforce vim /etc/selinux/config #change the value of `SELINUX` from `enforcing` to `permissive`
You may have to disable SELinux completely if there's Passenger installation problem
vim /etc/selinux/config #change the value of `SELINUX` to `disabled`
Install EPEL
This package has libyaml-devel which is required by ruby and not provided by Redhat.
rpm -ivh http://linux.mirrors.es.net/fedora-epel/6/i386/epel-release-6-8.noarch.rpm
Add the Avalon repository
Create the Avalon repository config file:
vim /etc/yum.repos.d/avalon-public.repo
Append the following code:
[avalon_public] name=Avalon Public RHEL repository baseurl=http://repo.avalonmediasystem.org/x86_64 enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-avalon cost=150
Install and place the Avalon GPG key in the proper location:
curl http://repo.avalonmediasystem.org/RPM-GPG-KEY-avalon -o /etc/pki/rpm-gpg/RPM-GPG-KEY-avalon
Install development libraries and packages for building Ruby
yum groupinstall "Development Tools" yum install readline-devel zlib-devel libyaml-devel libffi-devel openssl-devel libxml2-devel libxslt-devel cmake
Install Java 8
yum install java-1.8.0-openjdk
Main Components
Fedora Commons Repository
Tomcat
Fedora runs as a webapp in Tomcat
Install Apache Tomcat
yum install tomcat vim /etc/tomcat/server.xml #line 71, change the Tomcat connector port from 8080 to 8984
Add Tomcat manager user
By default, no user has access to the Tomcat Manager App. Define a user in /etc/tomcat/tomcat-users.xml
with access to the manager-gui role. Below is a very basic example.
<tomcat-users> <role rolename="manager-gui"/> <user username="admin" password="<insert strong password here>" roles="manager-gui"/> </tomcat-users>
Configure Tomcat for Fedora
Append the following to /etc/sysconfig/tomcat
JAVA_OPTS="${JAVA_OPTS} -Dfcrepo.modeshape.configuration=classpath:/config/file-simple/repository.json -Dfcrepo.home=/var/avalon/fedora/"
Restart Tomcat
service tomcat restart
Download and run the fcrepo installer
mkdir -p /var/avalon/fedora chown tomcat:tomcat /var/avalon/fedora wget https://github.com/fcrepo4/fcrepo4/releases/download/fcrepo-4.7.1/fcrepo-webapp-4.7.1.war -O /usr/share/tomcat/webapps/fedora4.war
See if you can access Fedora's REST interface at http://<server host name>:8984/fedora4/rest
Try it out on your local machine and on another machine. If you can't reach the app from another machine, your iptables might need to be changed to allow access. If Fedora is not up, check the tomcat logs in /var/log/tomcat/. Catalina.out and localhost.<date>.log usually provide the best information.
Solr
Avalon makes use of Solr through the Blacklight gem for faceting and relevance-based searching.
Install prerequisites
yum install lsof
Download the solr tarball and run the installation script
Download Solr from http://www.apache.org/dyn/closer.cgi/lucene/solr/6.4.1
wget http://www-us.apache.org/dist/lucene/solr/6.4.1/solr-6.4.1.tgz tar xzf solr-6.4.1.tgz solr-6.4.1/bin/install_solr_service.sh --strip-components=2 bash ./install_solr_service.sh solr-6.4.1.tgz
By default, the script extracts the distribution archive into /opt
, configures Solr to write files into /var/solr
, and runs Solr as the solr
user. Follow the linked guide if you wish to change these defaults.
Create Avalon core for Solr
mkdir -p /tmp/avalon_solr/ wget https://raw.githubusercontent.com/avalonmediasystem/avalon/develop/solr/config/solrconfig.xml -O /tmp/avalon_solr/solrconfig.xml wget https://raw.githubusercontent.com/avalonmediasystem/avalon/develop/solr/config/schema.xml -O /tmp/avalon_solr/schema.xml su solr # Needs to run as solr user /opt/solr/bin/solr create_core -c avalon -d /tmp/avalon_solr exit
If you have successfully installed Solr you should be able to access the dashboard page at http://<server host name>:8983/solr
Instructions on how to manually start/stop Solr: https://cwiki.apache.org/confluence/display/solr/Running+Solr
MySQL
Avalon uses MySQL for storing search queries, user data and roles, and as a back end for asynchronously sending requests to Matterhorn.
Install MySQL server
yum install mysql-server service mysqld start
Create databases and users
Enter the mysql monitor
#mysql Welcome to the MySQL monitor. Commands end with ; or \g. ...etc... mysql>
Create a database for the Avalon web application and add a user to it
create database rails; create user 'rails'@'localhost' identified by 'rails'; grant all privileges on rails.* to 'rails'@'localhost'; flush privileges;
Check your work and exit
mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | rails | | test | +--------------------+ 5 rows in set (0.00 sec) mysql> select user, host from mysql.user; +--------+--------------+ | user | host | +--------+--------------+ | root | 127.0.0.1 | | | 129.79.32.87 | | root | 129.79.32.87 | | | localhost | | rails | localhost | | root | localhost | +--------+--------------+ 7 rows in set (0.00 sec) mysql> exit; Bye
See documentation for your version of MySQL Server for detailed syntax (http://dev.mysql.com/doc/refman/5.1/en/create-database.html )
Red5 Media Server
Red5 is an open source alternative to Adobe Media Server. If using the Adobe Media Server you can skip to the next step.
Create a red5 user.
useradd red5
Download and install Red5.
wget http://repo.avalonmediasystem.org/red5-1.0.1.tar.gz tar xvf red5-1.0.1.tar.gz mv red5-server-1.0 /usr/local/red5
Download the init script and add it to the init.d directory.
wget https://raw.github.com/avalonmediasystem/avalon-installer/master/modules/red5/templates/red5_init_script.erb -O red5_init_script.sh mv red5_init_script.sh /etc/rc.d/init.d/red5
Give Red5 permissions to the red5 directory and the init script.
chown -R red5:red5 /usr/local/red5 chmod +x /etc/rc.d/init.d/red5
FFmpeg
Installation prerequisites
Install prerequisite packages using yum and the Avalon repository (note: mediainfo is pinned to 0.7.61-1 because of a bug with time fragment formatting in most recent version 0.7.87-1 in epel):
yum install SDL-devel a52dec-devel bzip2-devel faad2-devel freetype-devel frei0r-plugins-devel \ gsm-devel imlib2-devel lame-devel libdc1394-devel libraw1394-devel librtmp-devel libtheora-devel \ libva-devel libfaac-devel libvdpau-devel libstdc++-devel libvorbis-devel libvpx-devel \ mediainfo-0.7.61-1 opencore-amr-devel opencv-devel openjpeg-devel openssl-devel schroedinger-devel \ speex-devel texi2html vo-aacenc-devel x264-devel xvidcore-devel yasm zlib-devel
Install rpmdev-setuptree
yum install rpmdevtools
Install ffmpeg srpm
The following commands need to run under a user other than root. Change to the red5 user to continue.
su - red5
Run the ffmpeg installer
rpmdev-setuptree rpm -ivh https://github.com/avalonmediasystem/avalon-installer/blob/master/files/ffmpeg/ffmpeg-2.4.2-1.el6.src.rpm?raw=true # Retrieving https://github.com/avalonmediasystem/avalon-installer/blob/master/files/ffmpeg/ffmpeg-2.4.2-1.el6.src.rpm # 1:ffmpeg warning: user makerpm does not exist - using root # warning: group makerpm does not exist - using root ########################################### [100%] # warning: user makerpm does not exist - using root # warning: group makerpm does not exist - using root # Build ffmpeg binary as non-root and install as root rpmbuild -bb rpmbuild/SPECS/ffmpeg24.spec
Log back in as root and finish the install.
su - root rpm -ivh /home/red5/rpmbuild/RPMS/x86_64/ffmpeg-*.rpm
You can also build a more modern ffmpeg from source, but not all versions work. Version 3.1 is known to work - check out the release/3.1 branch and build from there. If your modern ffmpeg uses fdk_aac instead of libfaac, adjust the Matterhorn etc/encoding/avalon.properties accordingly.
HTTPD
Install and start the httpd service.
yum install httpd service httpd start
With newer httpd you may need to in /etc/httpd/conf.d/10-mod_rewrite.conf, replace RewriteLock line with Mutex sem
Matterhorn
Install Matterhorn
Create a user for Matterhorn and then install Matterhorn
useradd matterhorn wget https://github.com/avalonmediasystem/avalon-felix/archive/1.4.x.tar.gz tar xvf 1.4.x.tar.gz mv avalon-felix-1.4.x /usr/local/matterhorn wget --no-check-certificate https://raw.github.com/avalonmediasystem/config-files/master/matterhorn/matterhorn_init.sh mv matterhorn_init.sh /etc/init.d/matterhorn chmod +x /etc/init.d/matterhorn chown -R matterhorn:matterhorn /usr/local/matterhorn
Add avalon user and create avalon directory.
useradd avalon mkdir /var/www/avalon chown -R avalon:avalon /var/www/avalon
Create and configure the media_path (upload) and streaming directories.
mkdir -p /usr/local/masterfiles chown avalon:avalon /usr/local/masterfiles mkdir -p /usr/local/red5/webapps/avalon/streams mkdir /var/avalon mkdir -p /var/www/avalon/public/streams chown red5:avalon /usr/local/red5/webapps/avalon/streams chmod 0775 /usr/local/red5/webapps/avalon/streams ln -s /usr/local/red5/webapps/avalon/streams /var/avalon/rtmp_streams mkdir /var/avalon/hls_streams chown matterhorn:matterhorn /var/avalon/hls_streams/ ln -s /var/avalon/hls_streams/ /var/www/avalon/public/streams chmod 0775 /var/avalon/hls_streams/
Configure Matterhorn
Download Matterhorn config and verify property values.
wget --no-check-certificate https://raw.github.com/avalonmediasystem/config-files/master/matterhorn/config.properties vim config.properties
And verify the configuration of the streaming directories
org.opencastproject.streaming.directory=/var/avalon/rtmp_streams org.opencastproject.hls.directory=/var/avalon/hls_streams
Also check in /usr/local/matterhorn/etc/load/org.opencastproject.organization-mh_default_org.cfg
prop.avalon.stream_base=file:///var/avalon/rtmp_streams
Move the config to the appropriate spot
mv config.properties /usr/local/matterhorn/etc/
Add matterhorn user to the avalon group.
usermod -G avalon matterhorn
Optional, but recommended to avoid problems with batch ingest: /wiki/spaces/AVALON/pages/1957954226.
Apache Passenger and Ruby
Change current user to avalon then install RVM and ruby 2.2.5
su - root yum install sqlite-devel su - avalon curl -L https://get.rvm.io | bash -s stable --ruby=2.2.5
Source the RVM shell (as avalon user) or close the terminal and open it back up.
source /home/avalon/.rvm/scripts/rvm rvm use 2.2.5
Install Passenger via Gem (as avalon user)
gem install passenger
Check to make sure passenger installed in the expected location (as avalon user)
$ passenger-config --root /home/avalon/.rvm/gems/ruby-2.2.5/gems/passenger-5.0.17
Install Passenger apache module requirements (as root)
su - root yum install curl-devel httpd httpd-devel apr-devel apr-util-devel
Build passenger for your version of Apache and Ruby (as avalon user)
su - avalon passenger-install-apache2-module #copy the suggested Apache configuration file settings for later
Create an apache configuration file (as root)
su - root vim /etc/httpd/conf.d/passenger.conf
Example contents of /etc/httpd/conf.d/passenger.conf, which may need to be changed based off of the current version of ruby and passenger:
LoadModule passenger_module /home/avalon/.rvm/gems/ruby-2.2.5/gems/passenger-5.0.17/buildout/apache2/mod_passenger.so <IfModule passenger_module> PassengerRoot /home/avalon/.rvm/gems/ruby-2.2.5/gems/passenger-5.0.17 PassengerDefaultRuby /home/avalon/.rvm/wrappers/ruby-2.2.5/ruby PassengerMaxPoolSize 30 PassengerPoolIdleTime 300 PassengerMaxInstancesPerApp 0 PassengerMinInstances 3 PassengerSpawnMethod smart-lv2 </IfModule>
Apache security configuration
wget --no-check-certificate https://raw.github.com/avalonmediasystem/config-files/master/sbin/avalon_auth -O /usr/local/sbin/avalon_auth chmod +x /usr/local/sbin/avalon_auth wget --no-check-certificate https://raw.github.com/avalonmediasystem/config-files/master/apache/10-mod_rewrite.conf -P /etc/httpd/conf.d/
Create a virtual host for avalon in /etc/httpd/conf.d/avalon.conf
wget --no-check-certificate https://raw.github.com/avalonmediasystem/config-files/master/apache/20-avalon.conf -P /etc/httpd/conf.d/ vim /etc/httpd/conf.d/20-avalon.conf
In 20-avalon.conf add this line inside the VirtualHost tag:
RailsEnv development
If using SSL, the following fix should be added to address BEAST, POODLE, RC4 issues (after the SSLEngine on
)
SSLProtocol all -SSLv2 -SSLv3 SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:!RC4:+HIGH:+MEDIUM:-LOW
Restart apache. With apache running, check passenger-status
service httpd restart su - avalon which passenger-status #> ~/.rvm/gems/ruby-2.2.5/bin/passenger-status
Avalon
Grab Avalon code from github
cd ~ git clone git://github.com/avalonmediasystem/avalon.git cd avalon git checkout master #make sure you are in the master branch (should be by default) su - root chown avalon:avalon /var/www/avalon/public/ su - avalon mv public/* /var/www/avalon/public/ rmdir public mv * /var/www/avalon/
Configure Avalon
If using vim with default settings and pasting the the code below, it will automatically comment out the last line. To prevent that, enable paste using the command :set paste and then use just ctrl+shift+v instead of going into insert mode.
Create /var/www/avalon/config/setup_load_paths.rb and add:
if ENV['MY_RUBY_HOME'] && ENV['MY_RUBY_HOME'].include?('rvm') begin gems_path = ENV['MY_RUBY_HOME'].split(/@/)[0].sub(/rubies/,'gems') ENV['GEM_PATH'] = "#{gems_path}:#{gems_path}@global" require 'rvm' RVM.use_from_path! File.dirname(File.dirname(__FILE__)) rescue LoadError raise "RVM gem is currently unavailable." end end # If you're not using Bundler at all, remove lines bellow ENV['BUNDLE_GEMFILE'] = File.expand_path('../Gemfile', File.dirname(__FILE__)) require 'bundler/setup'
cd /var/www/avalon/config cp authentication.yml.example authentication.yml
Configure database settings
vim database.yml
Replace database.yml with the correct values for your production environment
development: adapter: mysql2 host: localhost database: rails username: rails password: rails pool: 5 timeout: 5000
Install the mysql2 adapter
yum install cmake #<--will be required for rugged gem yum install mysql-devel su - avalon gem install activerecord-mysql2-adapter gem install mysql2 vim /var/www/avalon/Gemfile
Add this line to the Gemfile
gem 'mysql2', '~>0.3.20'
If you are using mysql instead of sqllite (as is done throughout this document), then comment out the following lines in the Gemfile
# gem 'activerecord-jdbcsqlite3-adapter' # gem 'jdbc-sqlite3' # gem 'sqlite3'
Run the bundle install
# as root yum install nodejs # Javascript runtime # as avalon cd /var/www/avalon gem update debugger-ruby_core_source gem install bundler bundle install
Finish configuring Avalon
Edit /var/www/avalon/config/solr.yml and /var/www/avalon/config/blacklight.yml
development: url: http://localhost:8983/solr/avalon
Edit /var/www/avalon/config/fedora.yml
development: user: fedoraAdmin password: fedoraPassword url: http://127.0.0.1:8984/fedora4/rest base_path: /dev
Create /var/www/avalon/config/matterhorn.yml
development: url: http://matterhorn_system_account:CHANGE_ME@localhost:8080/
Create /var/www/avalon/config/avalon.yml and base it off of /var/www/avalon/config/avalon.yml.example. Consult the documentation to customize this file for your installation.
development: dropbox: path: '/var/avalon/dropbox/' upload_uri: 'sftp://localhost/var/avalon/dropbox' username: 'test' password: 'test' notification_email_address: '' domain: port: 80
Change the secrets.yml file:
cd /var/www/avalon/config rake secret
grab the output of rake secret and add it to secrets.yml where instructed.
More information: Configuration Files#config/secrets.yml
Create controlled_vocabulary.yml
cp controlled_vocabulary.yml.example controlled_vocabulary.yml
Create the database using rake
# as avalon user cd /var/www/avalon rake db:create
If you get an error message saying that you can't connect to the database, take a look at this post and follow some of the troubleshooting steps.
Run the database migrations
rake db:migrate
Set rails environment to development, if it has not defaulted to this. On the first line of /var/www/avalon/config/environment.rb make sure it says 'development'
ENV['RAILS_ENV'] ||= 'development'
Visit your new Avalon site!
You should be able to visit the webpage with just the hostname (ie http://localhost)
Click on "Sign in" in the upper right corner of the website main page. Set up a default identity with the following properties.
archivist1@example.com <some password>
This is a known identity with administrative privileges.
Redis & Resque
Avalon uses Resque for background processing, which relies Redis as its key-value store.
Install Redis
yum install redis
Start Resque
# as avalon cd /var/www/avalon/ BACKGROUND=yes bundle exec rake environment resque:scheduler BACKGROUND=yes QUEUE=* bundle exec rake resque:work
Resque logs to log/resque.log in the avalon directory.
Red5 Avalon Security Webapp
cd /usr/local/red5/webapps wget https://github.com/avalonmediasystem/avalon-installer/raw/master/modules/avalon/files/red5/red5-avalon.tar.gz tar xvzf red5-avalon.tar.gz chown -R red5:red5 avalon/
Edit /usr/local/red5/webapps/avalon/WEB-INF/red5-web.properties
avalon.serverUrl=http://localhost/
Restart Red5
service red5 restart
If Red5 is installed and running you should be able to access http://avalon.dev:5080/
Additional Configurations
Dropbox
groupadd -r dropbox useradd -r avalondrop usermod -G dropbox avalon mkdir -p /var/avalon/dropbox chown avalondrop:dropbox /var/avalon/dropbox chmod 2775 /var/avalon/dropbox
Edit /etc/ssh/sshd_config
# override default of no subsystems Subsystem sftp internal-sftp # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server Match Group dropbox ChrootDirectory /var/avalon X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp
Restart SSH
service sshd restart
Batch ingest
To manually start a batch ingest job, run as avalon user
rake avalon:batch:ingest
To make batch ingest run automatically whenever a manifest is present, you need to add a cron job. This cron job can be created by the whenever gem from reading config/schedule.rb
. To preview, run
whenever
this will translate content in schedule.rb
to cron job syntax. Once verified, run the following to write job to crontab
whenever --update-crontab
You should get the cron job automatically if you were deploying from Capistrano.
Using the System
You can find specific information about using the system in the Collection Manager's Guide. /wiki/spaces/AVALON/pages/1957954522 is available for your convenience. Upload new items individually or by batch directly via SFTP using the avalondrop account you created above.
Configure additional feataures
Known Issues - a list of bugs, workarounds, and cautions.
Restarting the Server
Before you restart your Avalon server, you'll want to make sure all of the services necessary to run Avalon will start automatically after the restart. Run these commands once and you should be set:
chkconfig --level 345 tomcat on chkconfig --level 345 mysqld on chkconfig --level 345 sshd on chkconfig --level 345 red5 on chkconfig --level 345 httpd on chkconfig --level 345 matterhorn on